The winter months put an added load on your home’s electrical panel, thanks to demand from the heating system, greater lighting use, and people being indoors more. If you need to upgrade your house’s electrical panel, it is wise to schedule the work before winter. Pay attention to the following warning signs that you need to upgrade an old electrical panel before winter.
Frequent Circuit Breaker Trips
Especially if circuit breakers seem to trip during normal use, that is a strong possible sign that your home’s panel might require an upgrade. If one or two specific circuits keep having trouble, you might get lucky and only need to replace the corresponding breakers. However, you should strongly consider a full panel upgrade if the circuit breakers for multiple rooms are tripping. Likewise, you should be concerned if the panel’s main breaker trips repeatedly.
It is a good idea to pay attention to the signs of trouble with the breakers and the panel when you reset the power. If you can feel warmth from the breaker or panel when you flip a circuit back on, that indicates that there are overheating issues. Any melted plastic or discolored metal is a bad sign, especially if there’s a corresponding burnt smell.
Bear in mind that specific actions during the winter can also cause breakers to trip. While it’s a less common issue in the age of low-draw LED lights, holiday displays can overload a circuit. This is especially true if all the lights connect to outlets on the same circuit.
Another common source of wintertime circuit breaker trips is the use of portable electric heaters. Homeowners often plug these heaters into outlets that have too little capacity. For example, many living rooms share a 15-amp breaker with at least one adjoining room. Many electric heaters, particularly electric furnaces, can overload such circuits on their own. You may need to upgrade the circuit or install a panel with greater capacity.
Visible Deterioration
Corrosion often degrades electrical panels, even in homes with good humidity control in the vicinity of the panel. Moisture can collect inside a panel, leading to rusted metal components. Over time, the rust can degrade the efficiency of the panel, causing it to work harder to push the same amount of electricity. If you see orange stains near the panel, you may need to replace it.
Scorch marks, discolored metal, and flaking paint are all additional indicators that the panel is degrading. Even if it’s just the housing, that isn’t a good sign. The panel needs to be secure, and the best solution with an older panel is a total replacement.
Not Enough Circuits
One of the simplest electrical panel upgrades is to add more circuit breakers to support more circuits. This is a smart move because it spreads the demand load out more. Spreading the load reduces the risk that one set of wiring or one breaker will fail, making your house safer.
The problem is that slots for circuit breakers aren’t infinite. Worse, people often don’t realize they’ve run out of space for additional circuits until they’ve used them all. You might decide to add a dedicated circuit to accommodate an electric fireplace, for example. However, there may not be a slot left on the panel.
Sometimes, it is possible to work with the existing setup. For example, you might run a subpanel to a high-capacity breaker. This is a common solution for some garages.
If there’s no more room left for a breaker, then the best solution is to install a new panel with more slots. Unsurprisingly, this offers an increase in the panel’s total capacity.
Insufficient Amperage Capacity
In addition to the slot count, your panel needs to be able to support the amperage demand for your house. We always strongly recommend that each circuit have at least 20% overhead left. This significantly reduces the risk that a large draw from something like an HVAC or a refrigerator cycling will trip the circuit.
Notably, many older homes have panels with low amperage ratings. Many old panels only support 100 amps, while our company recommends using at least a 200-amp panel. If you’ve maxed out a panel’s amperage, the only solution is a new panel or an additional panel that also works with the service entrance. In nearly all cases, the simplest solution is to install a single higher-capacity panel.
Lack of Support For Additional or More Modern Systems
One of the biggest changes in American life in the last decade that has prompted lots of electrical panel upgrades has been the rise of at-home electric vehicle charging. Level 1 chargers are usually compatible with existing home electrical infrastructure, but they also tend to be the slowest. Level 2 chargers are best for people who want to charge their car before they go to bed and have it fully charged for the day’s commute.
The problem is that Level 2 chargers require a dedicated 240-volt circuit on the panel. 240-volt power appears on lots of older panels. In many households, however, the 240-volt circuit is already occupied by a connection for the washer and dryer. For decades, this was sufficient, so manufacturers didn’t include more 240-volt connections on panels. Consequently, homeowners must replace their older panels to have room for an EV charging station circuit.
Adding systems can also overtax your electrical panel. You might install a higher-capacity HVAC, for example. Some newer HVACs require dedicated 50-amp circuits. Other large appliances that can challenge an electrical panel include:
- Refrigerators
- Freezer chests
- Electric stoves
- Hot tubs
- Tankless water heaters
Lack of Safety Systems
Modern homes should have extensive safety features built into their electrical system. Grounding is a must. Also, the current National Electric Code requires GFCI outlets in many locations, including bathroom and kitchen areas where water is present. You may also want AFCI outlets to reduce the risk of a damaged wire in the wall shorting.
Support for proper safety starts with the electrical panel. Make sure your panel supports a wide range of safety features.
Age
Some panels can seem to age well, but this is often deceptive. A degraded electrical panel can sometimes overcome its declining capacity by drawing more power. This creates the sense that an old panel is okay, even as your home draws more electricity.
A good rule of thumb is to replace the panel every 25 years. Many home buyers also replace the panel when they move in, ensuring they know exactly what they’re dealing with.
Mend Services has an A+ rating with the BBB. Our licensed electricians can handle a variety of projects, including installations, repairs, and upgrades. We can also respond to emergencies 24/7. You can ask us for help with commercial or residential needs, too. Check out the specials on our site to learn how you might save on your project.
If you’re concerned about the state of the electrical panel in your Austin, TX home, contact Mend Services right away.
